Introduction of Good Rotary Tiller

Introduction of Good Rotary tiller

Rotary tiller is a cultivating machine matched with a tractor to complete plowing and harrowing operations. It has been widely used because of its strong soil crushing ability and flat surface after ploughing.
According to the configuration of the rotary tiller shaft, it is divided into two types: horizontal axis type and vertical axis type. Correct use and adjustment of the rotary tiller is very important to maintain its good technical state and ensure the quality of farming.
It has the functions of breaking the bottom of the plow, restoring the structure of the soil ploughing layer, improving the ability of soil water storage and moisture retention, eliminating some weeds, reducing pests and diseases, leveling the surface and improving the standard of agricultural mechanization.

Driven soil Tillage Machinery with rotating cutter teeth as working parts, also known as rotary tiller. According to the configuration of the rotary tiller shaft, it is divided into two types: horizontal axis type and vertical axis type. The horizontal axis rotary tiller with the horizontal axis of the knife is widely used. The classification has a strong ability to crush soil. One operation can make the soil finely crushed, the soil and fertilizer are evenly mixed, and the ground is flat, which can meet the requirements of dry land sowing or paddy field planting, which is conducive to fighting for farming time, improving work efficiency, and making full use of the power of the tractor. 

1. At the beginning of the operation, the rotary cultivator should be in a lifted state, first combine the power take-off shaft to increase the speed of the cutter shaft to the rated speed, and then lower the rotary cultivator to gradually sink the blade to the required depth. It is strictly forbidden to combine the power take-off shaft or drop the rotary tiller sharply after the blade is buried in the soil, so as to avoid bending or breaking the blade and increasing the load of the tractor.
2. During the operation, the speed should be as low as possible, which can not only ensure the quality of the operation, make the clods fine, but also reduce the wear of the machine parts. Pay attention to whether the rotary tiller has noise or metal percussion sound, and observe the broken soil and deep tillage. If there is any abnormality, it should be stopped immediately for inspection, and the operation can be continued after the removal.